接待离开北京多多宾城修建机器有限公司
- ###
-
GQ40C型钢筋堵截机次要技能参数（钢筋抗拉强度σb≤500Mpa以下）
GQ40 Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb≤500Mpa below)
|
项目/型号 |
GQ40C型 |
|
堵截钢筋最大直径（mm） |
φ6-φ40 |
|
堵截Ⅱ级螺纹钢规格（mm） |
φ6-φ32mm |
|
堵截Ⅲ级螺纹钢规格（mm） |
φ6-φ32mm |
|
切刀公称冲程（mm）
|
34 |
|
一连堵截次数（次/min）
|
32 |
|
电念头型号 |
Y100L-2 |
|
电念头功率 |
3.0Kw |
|
额外电压 |
380 V±5% |
|
电念头转速 |
2880r/min |
|
外型尺寸（mm）
|
1260×530×730 |
|
包装尺寸（木包出口型） |
1320×600×830 mm |
|
零件质量
|
350±10Kg |
品牌型号 ： GQ40C
GQ40C钢筋堵截机，实用于修建工程上种种钢筋混凝土中平凡碳素钢及热轧圆钢和螺纹钢的堵截，为您的施工低落少量的人力，大幅进步成效。该机具有以下特点。
1、 体积小、布局紧凑、乐音低，冲程大。
2、 光滑功能好：接纳箱式关闭布局，齿轮飞溅光滑（油面应不高于油标刻线，使呆板一直处于得当的光滑形态）
3、 功率消耗少：因光滑条件的改进，齿轮轴端接纳转动轴承，阻力小，与同类堵截机相比同负载时功率消耗可低落三分之一。
挪动利便：四轮着地，演习机动，波动牢靠，维修利便
GQ40C Reinforcing Bar Cutting Machine, is usedto cut off all kinds of normal carbon steel, The cross-section of the steel bar end cut by this machine is very parallel andlevel, which can be directly for threading working. It reduce the worker numberand improve the efficiency significantly. This machine has the
followingcharacteristics.
1. Small volume, compactstructure, low noise, large stroke.
2. Lubricating performance: adopt the box-typeclosed structure, gear splash lubrication (oil surface should notbe h igher than standard oil
groove, so that the machine is always in a properlubrication state)
3. Less power loss: due to the improvement oflubrication condition, gear shaft end uses rolling bearings, theresist ance is small, compared
with the same kind of cutting machine, the power loss can bereduced
by 1/3.
Convenient movement: the four wheelson the ground, flexible, stable
and reliable, convenient maintenance.
